Beiträge von Flokill2

    Ok besser als in den folgenden CommandLines kann man's nich machen, die Puffer sind weg was will man mehr:


    seta com_videoRam "1024" //sets the Video Card memory Set this to the amount you have in MB
    seta com_maxfps "60" //limits the frames to 60 can be changed to what you desire
    seta image_anisotropy "8" //Using the highest setting here but you can set as 2, 4 or 8
    seta image_usecompression 0
    seta image_filter "GL_LINEAR_MIPMAP_LINEAR" //filtering for light maps
    seta image_preload "1" //Use preload images when ever possible
    seta image_lodbias "-1" //LoD settings
    seta image_ignoreHighQuality "0" //Sets up for using HQ gfx
    seta image_ignoreLowQuality "1" //ignores the low textures
    seta image_useCache "1" //Enabled Cache to allow the textures to load properly without popping
    seta image_cacheMegs "125" //Cache size in Megabytes
    seta image_cacheMinK "50" //Cache minimum size in kilobytes
    seta r_swapInterval 1 //VSYNC 1 enabled, 0 diabled
    seta r_useHighQualityPostProcess "1" //Fore High Quality post proccessing
    seta r_shadowsHighQuality "1" //Fore High Quality shadows
    seta r_displayRefresh "1" //keep it so the engine doesn't double render a frame
    seta r_renderer "best" //highest rendering options
    seta r_multiSamples "8" //Set this to 16 or 8 if you're having low-fps as 32 is the Max Multi-sampling
    seta r_useHBAO "1" //Ambient occlusion
    seta r_useRenderThread "1" // 0 Disable or 1 Enable threaded rendering useful for newer cards to increase performance.
    seta r_visDistMult "1"
    seta r_useMotionBlur "1" //use blur
    seta r_skipBump "0"
    seta r_skipSpecular "0"
    seta r_skipNewAmbient "0"
    seta r_shadows "1"
    seta r_cgFragmentProfile "best"
    seta r_cgVertexProfile "best"
    seta vt_lodBias "-1" //LoD settings
    seta vt_maxPPF "16"
    seta m_smooth "0"
    seta r_useHBAO "1"
    //below is cache settings
    seta vt_pageimagesizeuniquediffuseonly2 "8192"
    seta vt_pageimagesizeuniquediffuseonly "8192"
    seta vt_pageimagesizeunique "8192"
    seta vt_pageimagesizevmtr "8192"


    Einfach in ne leere '.txt'-Datei einfügen und die Datei auf 'rageconfig.cfg' umbenennen.
    Die '.cfg'-Datei dann einfach in den 'base'-Ordner einfügen. Ohne Steam: C:\Program Files\Bethesda Softworks\Rage\base


    MfG


    Flokill2 :hail: :chainsaw:

    Ok besser als in den folgenden CommandLines kann man's nich machen, die Puffer sind weg was will man mehr:


    seta com_videoRam "1024" //sets the Video Card memory Set this to the amount you have in MB
    seta com_maxfps "60" //limits the frames to 60 can be changed to what you desire
    seta image_anisotropy "8" //Using the highest setting here but you can set as 2, 4 or 8
    seta image_usecompression 0
    seta image_filter "GL_LINEAR_MIPMAP_LINEAR" //filtering for light maps
    seta image_preload "1" //Use preload images when ever possible
    seta image_lodbias "-1" //LoD settings
    seta image_ignoreHighQuality "0" //Sets up for using HQ gfx
    seta image_ignoreLowQuality "1" //ignores the low textures
    seta image_useCache "1" //Enabled Cache to allow the textures to load properly without popping
    seta image_cacheMegs "125" //Cache size in Megabytes
    seta image_cacheMinK "50" //Cache minimum size in kilobytes
    seta r_swapInterval 1 //VSYNC 1 enabled, 0 diabled
    seta r_useHighQualityPostProcess "1" //Fore High Quality post proccessing
    seta r_shadowsHighQuality "1" //Fore High Quality shadows
    seta r_displayRefresh "1" //keep it so the engine doesn't double render a frame
    seta r_renderer "best" //highest rendering options
    seta r_multiSamples "8" //Set this to 16 or 8 if you're having low-fps as 32 is the Max Multi-sampling
    seta r_useHBAO "1" //Ambient occlusion
    seta r_useRenderThread "1" // 0 Disable or 1 Enable threaded rendering useful for newer cards to increase performance.
    seta r_visDistMult "1"
    seta r_useMotionBlur "1" //use blur
    seta r_skipBump "0"
    seta r_skipSpecular "0"
    seta r_skipNewAmbient "0"
    seta r_shadows "1"
    seta r_cgFragmentProfile "best"
    seta r_cgVertexProfile "best"
    seta vt_lodBias "-1" //LoD settings
    seta vt_maxPPF "16"
    seta m_smooth "0"
    seta r_useHBAO "1"
    //below is cache settings
    seta vt_pageimagesizeuniquediffuseonly2 "8192"
    seta vt_pageimagesizeuniquediffuseonly "8192"
    seta vt_pageimagesizeunique "8192"
    seta vt_pageimagesizevmtr "8192"


    Einfach in ne leere '.txt'-Datei einfügen und die Datei auf 'rageconfig.cfg' umbenennen.
    Die '.cfg'-Datei dann einfach in den 'base'-Ordner einfügen. Ohne Steam: C:\Program Files\Bethesda Softworks\Rage\base


    MfG


    Flokill2 :hail: :chainsaw:

    Ok besser als in den folgenden CommandLines kann man's nich machen, die Puffer sind weg was will man mehr:


    seta com_videoRam "1024" //sets the Video Card memory Set this to the amount you have in MB
    seta com_maxfps "60" //limits the frames to 60 can be changed to what you desire
    seta image_anisotropy "8" //Using the highest setting here but you can set as 2, 4 or 8
    seta image_usecompression 0
    seta image_filter "GL_LINEAR_MIPMAP_LINEAR" //filtering for light maps
    seta image_preload "1" //Use preload images when ever possible
    seta image_lodbias "-1" //LoD settings
    seta image_ignoreHighQuality "0" //Sets up for using HQ gfx
    seta image_ignoreLowQuality "1" //ignores the low textures
    seta image_useCache "1" //Enabled Cache to allow the textures to load properly without popping
    seta image_cacheMegs "125" //Cache size in Megabytes
    seta image_cacheMinK "50" //Cache minimum size in kilobytes
    seta r_swapInterval 1 //VSYNC 1 enabled, 0 diabled
    seta r_useHighQualityPostProcess "1" //Fore High Quality post proccessing
    seta r_shadowsHighQuality "1" //Fore High Quality shadows
    seta r_displayRefresh "1" //keep it so the engine doesn't double render a frame
    seta r_renderer "best" //highest rendering options
    seta r_multiSamples "8" //Set this to 16 or 8 if you're having low-fps as 32 is the Max Multi-sampling
    seta r_useHBAO "1" //Ambient occlusion
    seta r_useRenderThread "1" // 0 Disable or 1 Enable threaded rendering useful for newer cards to increase performance.
    seta r_visDistMult "1"
    seta r_useMotionBlur "1" //use blur
    seta r_skipBump "0"
    seta r_skipSpecular "0"
    seta r_skipNewAmbient "0"
    seta r_shadows "1"
    seta r_cgFragmentProfile "best"
    seta r_cgVertexProfile "best"
    seta vt_lodBias "-1" //LoD settings
    seta vt_maxPPF "16"
    seta m_smooth "0"
    seta r_useHBAO "1"
    //below is cache settings
    seta vt_pageimagesizeuniquediffuseonly2 "8192"
    seta vt_pageimagesizeuniquediffuseonly "8192"
    seta vt_pageimagesizeunique "8192"
    seta vt_pageimagesizevmtr "8192"


    Einfach in ne leere '.txt'-Datei einfügen und die Datei auf 'rageconfig.cfg' umbenennen.
    Die '.cfg'-Datei dann einfach in den 'base'-Ordner einfügen. Ohne Steam: C:\Program Files\Bethesda Softworks\Rage\base


    MfG


    Flokill2 :hail: :chainsaw:

    Hallo erstmal,


    hab mir das alt bekannte-unbekannte TechnoMage für PC geholt! :thumbup:
    Ein sehr toller RPG aus dem Jahr 2000!

    Jedoch habe ich nicht beachtet, das es auf ENGLISCH ist... :pinch:


    Jetzt die Frage: Hat jemand rein zufällig dieses Spiel auf PC und DEUTSCH(Das gibt es auf Deutsch)? Wenn ja, könnte derjenige dann die deutschen Sprach- und Textdateien oder die Ordner ''Spc'' und ''Txt'' aus C:\program Files\TechnoMage\Spc und Txt uploaden und zum Download zur Verfügung stellen?


    Wäre sehr Nett, denn ich hab dieses Spiel sehr gerne auf meiner PS1 gespielt. Jetzt ist die Disc broken...



    MfG!


    Flokill2 :hail: :chainsaw:

    Hallo erstmal,


    hab mir das alt bekannte-unbekannte TechnoMage für PC geholt! :thumbup:
    Ein sehr toller RPG aus dem Jahr 2000!

    Jedoch habe ich nicht beachtet, das es auf ENGLISCH ist... :pinch:


    Jetzt die Frage: Hat jemand rein zufällig dieses Spiel auf PC und DEUTSCH(Das gibt es auf Deutsch)? Wenn ja, könnte derjenige dann die deutschen Sprach- und Textdateien oder die Ordner ''Spc'' und ''Txt'' aus C:\program Files\TechnoMage\Spc und Txt uploaden und zum Download zur Verfügung stellen?


    Wäre sehr Nett, denn ich hab dieses Spiel sehr gerne auf meiner PS1 gespielt. Jetzt ist die Disc broken...



    MfG!


    Flokill2 :hail: :chainsaw:

    Hallo erstmal,


    hab mir das alt bekannte-unbekannte TechnoMage für PC geholt! :thumbup:
    Ein sehr toller RPG aus dem Jahr 2000!

    Jedoch habe ich nicht beachtet, das es auf ENGLISCH ist... :pinch:


    Jetzt die Frage: Hat jemand rein zufällig dieses Spiel auf PC und DEUTSCH(Das gibt es auf Deutsch)? Wenn ja, könnte derjenige dann die deutschen Sprach- und Textdateien oder die Ordner ''Spc'' und ''Txt'' aus C:\program Files\TechnoMage\Spc und Txt uploaden und zum Download zur Verfügung stellen?


    Wäre sehr Nett, denn ich hab dieses Spiel sehr gerne auf meiner PS1 gespielt. Jetzt ist die Disc broken...



    MfG!


    Flokill2 :hail: :chainsaw:

    So hab ma hier was gefunden:


    "1.Create a Rage shortcut with the following launch parameters:


    +cvaradd g_fov 12 +com_allowconsole 1 +com_skipIntroVideo 1 +image_anisotropy 4 +image_usecompression 0 +g_showplayershadow 1 +m_smooth 0



    2.Create a notepad file in rage/base folder called rageconfig.cfg and add the following:


    seta com_videoRam "1024" //sets the Video Card memory Set this to the amount you have in MB
    seta com_maxfps "60" //limits the frames to 60 can be changed to what you desire
    seta image_anisotropy "4" //Using the highest setting here but you can set as 2, 4 or 8
    seta image_usecompression 0
    seta image_filter "GL_LINEAR_MIPMAP_LINEAR" //filtering for light maps
    seta image_preload "1" //Use preload images when ever possible
    seta image_lodbias "-1" //LoD settings
    seta image_ignoreHighQuality "1" //Sets up for using HQ gfx
    seta image_ignoreLowQuality "0" //ignores the low textures
    seta image_useCache "1" //Enabled Cache to allow the textures to load properly without popping
    seta image_cacheMegs "125" //Cache size in Megabytes
    seta image_cacheMinK "50" //Cache minimum size in kilobytes
    seta r_swapInterval 1 //VSYNC 1 enabled, 0 diabled
    seta r_useHighQualityPostProcess "1" //Fore High Quality post proccessing
    seta r_shadowsHighQuality "0" //Fore High Quality shadows
    seta r_displayRefresh "0" //keep it so the engine doesn't double render a frame
    seta r_renderer "best" //highest rendering options
    seta r_multiSamples "2" //Set this to 16 or 8 if you're having low-fps as 32 is the Max Multi-sampling
    seta r_useHBAO "1" //Ambient occlusion
    seta r_useRenderThread "0" // 0 Disable or 1 Enable threaded rendering useful for newer cards to increase performance.
    seta r_visDistMult "1"
    seta r_useMotionBlur "1" //use blur
    seta r_skipBump "0"
    seta r_skipSpecular "0"
    seta r_skipNewAmbient "0"
    seta r_shadows "0"
    seta r_cgFragmentProfile "best"
    seta r_cgVertexProfile "best"
    seta vt_lodBias "-1" //LoD settings


    //below is cache settings


    seta vt_pageimagesizeuniquediffuseonly2 "8192"
    seta vt_pageimagesizeuniquediffuseonly "8192"
    seta vt_pageimagesizeunique "8192"
    seta vt_pageimagesizevmtr "8192"
    seta fc_maxcachememoryMB "1024"
    seta vt_maxPPF "16"
    seta com_allowConsole "1"
    seta com_skipIntroVideo "1"
    seta cg_usecompression "0"
    seta cg_useprecompressedtextures "0"


    3. Go to C:\Users\UserName\AppData\Local\ and create a folder called "id software" (without "). Then create a folder called "rage" (without ") inside that folder.


    4. Run game and play."


    ___________________________________________________________________________________


    Nun die Frage dazu: wie kann ich in die Shortcut/Verknüpfung die 'launch parameters' eingeben?


    Wenn ich das mache, kommt immer eine Meldung, dass der Ordner/Die Datei nicht gefunden wurden... :thumbdown:


    like this:


    ANGEBLICH DIE BESTE RageConfig'.cfg'... Wenn ich nur die 'launch parameters - StartParameter' in der Verknüpfung editieren könnte... :!: :pinch:

    So hab ma hier was gefunden:


    "1.Create a Rage shortcut with the following launch parameters:


    +cvaradd g_fov 12 +com_allowconsole 1 +com_skipIntroVideo 1 +image_anisotropy 4 +image_usecompression 0 +g_showplayershadow 1 +m_smooth 0



    2.Create a notepad file in rage/base folder called rageconfig.cfg and add the following:


    seta com_videoRam "1024" //sets the Video Card memory Set this to the amount you have in MB
    seta com_maxfps "60" //limits the frames to 60 can be changed to what you desire
    seta image_anisotropy "4" //Using the highest setting here but you can set as 2, 4 or 8
    seta image_usecompression 0
    seta image_filter "GL_LINEAR_MIPMAP_LINEAR" //filtering for light maps
    seta image_preload "1" //Use preload images when ever possible
    seta image_lodbias "-1" //LoD settings
    seta image_ignoreHighQuality "1" //Sets up for using HQ gfx
    seta image_ignoreLowQuality "0" //ignores the low textures
    seta image_useCache "1" //Enabled Cache to allow the textures to load properly without popping
    seta image_cacheMegs "125" //Cache size in Megabytes
    seta image_cacheMinK "50" //Cache minimum size in kilobytes
    seta r_swapInterval 1 //VSYNC 1 enabled, 0 diabled
    seta r_useHighQualityPostProcess "1" //Fore High Quality post proccessing
    seta r_shadowsHighQuality "0" //Fore High Quality shadows
    seta r_displayRefresh "0" //keep it so the engine doesn't double render a frame
    seta r_renderer "best" //highest rendering options
    seta r_multiSamples "2" //Set this to 16 or 8 if you're having low-fps as 32 is the Max Multi-sampling
    seta r_useHBAO "1" //Ambient occlusion
    seta r_useRenderThread "0" // 0 Disable or 1 Enable threaded rendering useful for newer cards to increase performance.
    seta r_visDistMult "1"
    seta r_useMotionBlur "1" //use blur
    seta r_skipBump "0"
    seta r_skipSpecular "0"
    seta r_skipNewAmbient "0"
    seta r_shadows "0"
    seta r_cgFragmentProfile "best"
    seta r_cgVertexProfile "best"
    seta vt_lodBias "-1" //LoD settings


    //below is cache settings


    seta vt_pageimagesizeuniquediffuseonly2 "8192"
    seta vt_pageimagesizeuniquediffuseonly "8192"
    seta vt_pageimagesizeunique "8192"
    seta vt_pageimagesizevmtr "8192"
    seta fc_maxcachememoryMB "1024"
    seta vt_maxPPF "16"
    seta com_allowConsole "1"
    seta com_skipIntroVideo "1"
    seta cg_usecompression "0"
    seta cg_useprecompressedtextures "0"


    3. Go to C:\Users\UserName\AppData\Local\ and create a folder called "id software" (without "). Then create a folder called "rage" (without ") inside that folder.


    4. Run game and play."


    ___________________________________________________________________________________


    Nun die Frage dazu: wie kann ich in die Shortcut/Verknüpfung die 'launch parameters' eingeben?


    Wenn ich das mache, kommt immer eine Meldung, dass der Ordner/Die Datei nicht gefunden wurden... :thumbdown:


    like this:


    ANGEBLICH DIE BESTE RageConfig'.cfg'... Wenn ich nur die 'launch parameters - StartParameter' in der Verknüpfung editieren könnte... :!: :pinch:

    So hab ma hier was gefunden:


    "1.Create a Rage shortcut with the following launch parameters:


    +cvaradd g_fov 12 +com_allowconsole 1 +com_skipIntroVideo 1 +image_anisotropy 4 +image_usecompression 0 +g_showplayershadow 1 +m_smooth 0



    2.Create a notepad file in rage/base folder called rageconfig.cfg and add the following:


    seta com_videoRam "1024" //sets the Video Card memory Set this to the amount you have in MB
    seta com_maxfps "60" //limits the frames to 60 can be changed to what you desire
    seta image_anisotropy "4" //Using the highest setting here but you can set as 2, 4 or 8
    seta image_usecompression 0
    seta image_filter "GL_LINEAR_MIPMAP_LINEAR" //filtering for light maps
    seta image_preload "1" //Use preload images when ever possible
    seta image_lodbias "-1" //LoD settings
    seta image_ignoreHighQuality "1" //Sets up for using HQ gfx
    seta image_ignoreLowQuality "0" //ignores the low textures
    seta image_useCache "1" //Enabled Cache to allow the textures to load properly without popping
    seta image_cacheMegs "125" //Cache size in Megabytes
    seta image_cacheMinK "50" //Cache minimum size in kilobytes
    seta r_swapInterval 1 //VSYNC 1 enabled, 0 diabled
    seta r_useHighQualityPostProcess "1" //Fore High Quality post proccessing
    seta r_shadowsHighQuality "0" //Fore High Quality shadows
    seta r_displayRefresh "0" //keep it so the engine doesn't double render a frame
    seta r_renderer "best" //highest rendering options
    seta r_multiSamples "2" //Set this to 16 or 8 if you're having low-fps as 32 is the Max Multi-sampling
    seta r_useHBAO "1" //Ambient occlusion
    seta r_useRenderThread "0" // 0 Disable or 1 Enable threaded rendering useful for newer cards to increase performance.
    seta r_visDistMult "1"
    seta r_useMotionBlur "1" //use blur
    seta r_skipBump "0"
    seta r_skipSpecular "0"
    seta r_skipNewAmbient "0"
    seta r_shadows "0"
    seta r_cgFragmentProfile "best"
    seta r_cgVertexProfile "best"
    seta vt_lodBias "-1" //LoD settings


    //below is cache settings


    seta vt_pageimagesizeuniquediffuseonly2 "8192"
    seta vt_pageimagesizeuniquediffuseonly "8192"
    seta vt_pageimagesizeunique "8192"
    seta vt_pageimagesizevmtr "8192"
    seta fc_maxcachememoryMB "1024"
    seta vt_maxPPF "16"
    seta com_allowConsole "1"
    seta com_skipIntroVideo "1"
    seta cg_usecompression "0"
    seta cg_useprecompressedtextures "0"


    3. Go to C:\Users\UserName\AppData\Local\ and create a folder called "id software" (without "). Then create a folder called "rage" (without ") inside that folder.


    4. Run game and play."


    ___________________________________________________________________________________


    Nun die Frage dazu: wie kann ich in die Shortcut/Verknüpfung die 'launch parameters' eingeben?


    Wenn ich das mache, kommt immer eine Meldung, dass der Ordner/Die Datei nicht gefunden wurden... :thumbdown:


    like this:


    ANGEBLICH DIE BESTE RageConfig'.cfg'... Wenn ich nur die 'launch parameters - StartParameter' in der Verknüpfung editieren könnte... :!: :pinch:

    Hi Community!,
    Erstmal Danke für den DeutschPatch! ;)


    Nun zum Wesentlichen! Hab mir vor drei Tagen RAGE zugelegt und mir ist aufgefallen, dass die Grafik des Games sehr leistungsintensiv arbeitet(lag lag lag :( ) und die Texturen nicht geladen bleiben(Auch bei Update/TexturFixPatch 1.2) sondern bei jedem Neuerscheinen langsam nachladen. Also wenn ich mich um 360° drehe sieht man direkt wieder die Texturen nachladen?...und wahrscheinlich liegt es dann auch daran, dass das Game lagt? :huh:
    So.. freue mich auf jeden hilfreichen Beitrag. Und könnte hier eventuell jemand einen TexturFixPatch a la OGS basteln? Würde mich sogar daran beteiligen...testen und so :thumbup:
    THX schonmal!
    Flokill2 :hail: :chainsaw: cost]] :doofy:

    Hi Community!,
    Erstmal Danke für den DeutschPatch! ;)


    Nun zum Wesentlichen! Hab mir vor drei Tagen RAGE zugelegt und mir ist aufgefallen, dass die Grafik des Games sehr leistungsintensiv arbeitet(lag lag lag :( ) und die Texturen nicht geladen bleiben(Auch bei Update/TexturFixPatch 1.2) sondern bei jedem Neuerscheinen langsam nachladen. Also wenn ich mich um 360° drehe sieht man direkt wieder die Texturen nachladen?...und wahrscheinlich liegt es dann auch daran, dass das Game lagt? :huh:
    So.. freue mich auf jeden hilfreichen Beitrag. Und könnte hier eventuell jemand einen TexturFixPatch a la OGS basteln? Würde mich sogar daran beteiligen...testen und so :thumbup:
    THX schonmal!
    Flokill2 :hail: :chainsaw: cost]] :doofy:

    Hi Community!,
    Erstmal Danke für den DeutschPatch! ;)


    Nun zum Wesentlichen! Hab mir vor drei Tagen RAGE zugelegt und mir ist aufgefallen, dass die Grafik des Games sehr leistungsintensiv arbeitet(lag lag lag :( ) und die Texturen nicht geladen bleiben(Auch bei Update/TexturFixPatch 1.2) sondern bei jedem Neuerscheinen langsam nachladen. Also wenn ich mich um 360° drehe sieht man direkt wieder die Texturen nachladen?...und wahrscheinlich liegt es dann auch daran, dass das Game lagt? :huh:
    So.. freue mich auf jeden hilfreichen Beitrag. Und könnte hier eventuell jemand einen TexturFixPatch a la OGS basteln? Würde mich sogar daran beteiligen...testen und so :thumbup:
    THX schonmal!
    Flokill2 :hail: :chainsaw: cost]] :doofy:

    is ja klar, dass FEAR(1) die beste Version de Reihe ist...
    Der Nostalgiefaktor der 'alten' Games wird bei mir immer Großgeschrieben! :tanz:


    Die Veteranen der meist bekannten Games sind in der Story immer mehr durchdacht als die Nachfolger und damit auch am Spannensten, findet ihr nicht? ^^

    is ja klar, dass FEAR(1) die beste Version de Reihe ist...
    Der Nostalgiefaktor der 'alten' Games wird bei mir immer Großgeschrieben! :tanz:


    Die Veteranen der meist bekannten Games sind in der Story immer mehr durchdacht als die Nachfolger und damit auch am Spannensten, findet ihr nicht? ^^

    is ja klar, dass FEAR(1) die beste Version de Reihe ist...
    Der Nostalgiefaktor der 'alten' Games wird bei mir immer Großgeschrieben! :tanz:


    Die Veteranen der meist bekannten Games sind in der Story immer mehr durchdacht als die Nachfolger und damit auch am Spannensten, findet ihr nicht? ^^

    Das ist genau das, was ich haben wollte! Danke!! :D


    Echt unverschämt, dass die sich dann noch 'UNCUT' auf die Verpackung schreiben trauen! Hab dafür auch 20€ gezahlt! :thumbdown:


    Yea! Aber jetz sieht's gleich viel besser aus! ;)

    Das ist genau das, was ich haben wollte! Danke!! :D


    Echt unverschämt, dass die sich dann noch 'UNCUT' auf die Verpackung schreiben trauen! Hab dafür auch 20€ gezahlt! :thumbdown:


    Yea! Aber jetz sieht's gleich viel besser aus! ;)